Suite au formatage de mon disque, je n'arrive plus à graver ni avec NERO ni avec EASY CD CREATOR...

Je pense avoir bien réinstallé le freeware adéquat et rien d'autre (pilote du CD ROM à prioi ok...)

Voici le message d'erreur sous NERO :

Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 01/01/1999 00:30:52
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Version de Nero : 6.3.1.20 (Nero Express)
Graveur : <SAMSUNG COMBO SM-304B> Version: BS05 - HA 0 TA 0 - 6.3.1.20
Pilote d'adaptateur :<ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <SAMSUNG COMBO SM-304B >Version: BS05 - HA 0 TA 0 - 6.3.1.20
Pilote d'adaptateur :<ESDI_506> HA 0
SAMSUNG COMBO SM-304B (Target 0, D:): Autoinsert On, DMA On, [b]Disconnect ?, SyncDataXfer ?[/b]
Excluded drive IDs:
WriteBufferSize: 15728640 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 63MB (64960kB)
Free physical memory: 0MB (8kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.1.1999
===== Disc-Copy over image - 1st step : Copy to image ...

01:14:42 #1 Text 0 File Reader.cpp, Line 126
Reader running

01:14:42 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

01:14:42 #3 Phase 48 File dlgbrnst.cpp, Line 1855
Analyse du disque

01:14:42 #4 CDCOPY -1 File CDCopy.cpp, Line 1896
Le CD a un copyright

01:14:42 #5 SCSI -1065 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05325000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06
0x00 0x00 0x00 0x00 0x20 0x00

01:14:46 #6 Text 0 File CDCopy.cpp, Line 2116
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 278925 278924 ( 62:00.74)

01:14:46 #7 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 278925 = 278925, data (TRM_DATA_MODE1, block size 2048)

01:14:46 #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disque entier, using CD-R/RW media

01:14:46 #9 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2147483646 (477218:37.21)
Last address to be written: 278924 ( 62:00.74)

01:14:46 #10 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

01:14:46 #11 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

01:14:46 #12 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

01:14:46 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Données (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 278925 (278925) = #278925/61:59.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 278925 blocks [ Image Recorder ]
--------------------------------------------------------------

01:14:46 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 571545600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
278925 | lead-out | 1 | 0x00 | 0x41

01:14:46 #15 Phase 120 File dlgbrnst.cpp, Line 1855
Création d'une image pour la gravure

01:14:46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

01:18:14 #17 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 278925 (4418Dh), lenght 0 blocks

01:18:14 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

01:18:15 #19 Phase 121 File dlgbrnst.cpp, Line 1855
Création d'image achevée avec succès



===== Disc-Copy over image - 2nd step : Burn the image ...

01:18:21 #1 Text 0 File Reader.cpp, Line 126
Reader running

01:18:21 #2 Text 0 File Writer.cpp, Line 124
Writer SAMSUNG COMBO SM-304B running

01:18:21 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 571545600
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=61:59.00 ( 278925)
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Mes documents\TempImage.nrg>

01:18:21 #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disque entier, using CD-R/RW media

01:18:49 #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 278924 ( 62:00.74)

01:18:49 #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

01:18:49 #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SAMSUNG COMBO SM-304B;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 00 00 00, 3: 00 00 00 (invalid)

01:18:49 #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Inconnu. Medium required by compilation: CD-R/RW.)

01:18:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Mode CD-ROM 1, ISO 9660)
2 indices, index0 (150) provided
original disc pos #0 + 278925 (278925) = #278925/61:59.0
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_ULTRARAW_MODE1, 2368, config 0x4, wanted index0 0 blocks, length 278925 blocks [SAMSUNG COMBO SM-304B ]
--------------------------------------------------------------

01:18:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SAMSUNG COMBO SM-304B ] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_ULTRARAW_MODE1, 2368/0x04, FilePos 0 355200 660849600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
278925 | lead-out | 1 | 0x00 | 0x41

01:18:49 #11 Phase 28 File dlgbrnst.cpp, Line 1855
Début mesure de vitesse

01:18:50 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

01:22:20 #13 Text 0 File WriterStatus.cpp, Line 115
<SAMSUNG COMBO SM-304B > start writing Lead-Out at LBA 278925 (4418Dh), lenght 6750 blocks

01:22:21 #14 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

01:22:21 #15 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

01:22:21 #16 Phase 29 File dlgbrnst.cpp, Line 1806
Mesure de vitesse terminée : 18,9x (2 836 Ko/s)

01:22:21 #17 Phase 32 File dlgbrnst.cpp, Line 1855
Début de simulation à 4x (600 Ko/s)

01:22:21 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

01:22:21 #19 Text 0 File Mmc.cpp, Line 15898
StartDAO : CD-Text - Off

01:22:23 #20 SCSI -400 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02A40000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xD2 0x1F 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06
0x00 0x00 0x00 0x00 0x27 0x00

01:22:23 #21 CDR -400 File Writer.cpp, Line 304
Erreur de cible non spécifiée

01:22:23 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

01:22:23 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

01:22:25 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

01:22:25 #25 Phase 34 File dlgbrnst.cpp, Line 1855
La simulation a échoué à 4x (600 Ko/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 11:55:38
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00 (Adapter driver for rec)

Registry Keys:

merci para avance de vous pencher sur le problème : ça fait deux mois que je galère pour graver...en vain :cry:

Posté le : 08/12/2005 14:43